Laptop network cable unplugged

If your laptop is showing “network cable unplugged” error, it means that the computer is not able to detect a network cable (also known as Ethernet cable) that is plugged into the network adapter. Here are some steps you can try to fix the issue:

1. Check the cable: Make sure that the cable is securely plugged into both the laptop and the router or modem. Check for any visible damage on the cable and make sure that the cable is not loose.
2. Restart your computer and router: Restarting the computer and router can often resolve temporary connectivity issues.
3. Update the Network Adapter driver: Go to Device Manager and check if the Network Adapter is up-to-date. If not, update the driver from the manufacturer’s website or from the laptop’s manufacturer website.
4. Check the network settings: Go to the Network and Sharing Center, and make sure that the network connection is set to “Automatic.”
5. Check for a software issue: Some software can interfere with the network connection. Disable any software that may be causing the issue and check if the problem is resolved.
6. Disable and re-enable the network adapter: Go to Device Manager and disable the network adapter. Then re-enable it.
7. Check the Ethernet port: If your laptop has a removable battery, remove it and check the Ethernet port for any dust or debris. Clean it with a small brush or a compressed air can.
8. Troubleshoot: Run the Network troubleshooter to check for any issues and fix them.

If the problem persists after trying these steps, it may be a hardware issue with the network adapter or the Ethernet port on the laptop.

Why does it say my network cable is unplugged?

If your laptop is showing “network cable unplugged” error, it means that the computer is not able to detect a network cable (also known as Ethernet cable) that is plugged into the network adapter. There could be several reasons for this:

1. Loose or disconnected cable: The cable may not be securely plugged into the laptop or the router, or it could be damaged. Make sure that the cable is properly connected and check for any visible damage on the cable.
2. Damaged Ethernet port: The Ethernet port on the laptop could be damaged or malfunctioning, preventing the cable from being detected.
3. Outdated or incorrect network adapter driver: The driver for the network adapter may be outdated or incorrect, causing the laptop to not recognize the cable. Updating the driver or reinstalling the driver may fix the issue.
4. Software issues: Some software can interfere with the network connection. Disable any software that may be causing the issue and check if the problem is resolved.
5. Malware or Virus: If your computer has a malware or virus, it can cause a network cable to appear unplugged.
6. Other hardware issues: The issue could be caused by a hardware problem with the laptop’s network card or other components. In this case, it may be best to contact the manufacturer or a professional technician for further assistance.

It’s important to note that some laptops have built-in wireless card and you have to make sure that you have enabled the Ethernet port to connect to the network.

Learn More About Top-rated Router Modems.